.jpg?la=en&h=310&w=720&hash=8D9823F26AA80B2B75C3E4B2E61770DC)
.png?la=en&h=320&w=721&hash=DBE19054245A42166662900C95711F6A){kind=logo}
.jpg?la=en&h=320&w=719&hash=13CA7E4AA3E453809B6726B561F2F4DD)
.jpg?la=en&h=306&w=720&hash=F21A7CD3C49EFBF4D41F00691D09AEAC){kind=logo}
.png?la=en&h=320&w=720&hash=18CFCCD916C92D922F600511FABD775D){kind=logo}
.jpg?la=en&h=320&w=720&hash=244C75B74F0F77521D56164450973BCD){kind=logo}
ESSB Shell-and-Tube Evaporator
The ESSB evaporator is designed for flooded evaporation of refrigerant outside the tubes and cooling of a secondary fluid on the tube side.
The heat exchanger is designed for cooling of secondary fluid mediums like water, ethylene, propylene glycol and other non-corrosive mediums. The capacity range is between 100 kW and 6500 kW.
- Designed for cooling of secondary fluid mediums like water, ethylene and other non-corrosive mediums
- Calculation and product selection via COMP1
- Available in more than 100 configurations
Designed for flooded evaporation of refrigerant outside the tubes and cooling of a secondary fluid on the tube side
The heat exchanger is designed for cooling of secondary fluid mediums like water, ethylene, propylene glycol and other non-corrosive mediums. The capacity range is between 100 kW and 6500 kW.
Benefits
Reduced footprint of installation
An external liquid separator is not needed, and the overall footprint of the installation is reduced
Accommodates different system designs
Various configurations of tube patterns accommodate different system designs
Simple product selection in COMP1
Simplified product selection and evaluation of thermal performance in part-load conditions
Cost-optimal solution
Cost-optimal solution for systems without salts or chlorines in the brine